Summary

Early in 2008 I bought a little, old wooden Folkboat called Valmik. I was going to spend a few months on repairs and begin sailing her around Europe, with Australia being the final destination. As my knowledge of boats improved, so did the thoroughness of the restoration. I decided to become very involved in every aspect of construction, doing almost all of the work myself: making my own sails, doing the fit out and all woodwork, splicing my own rig and wiring in the 12 volt electric circuit. Self-reliance, I suppose, is the goal. Follow the link to my photo albums for a detailed documentation of the work and some videos.

For a long time now, I have been striving to achieve my goals and begin an adventure. I had planned to complete a circumnavigation of the UK and Ireland in the summer of 2015 with my wife. Unfortunately, this will not be possible and I went back to work. Valmik is ready to sail, however, and I am finally in a position to start enjoying her for what she was designed for. Of course there is a never ending list of modifications and enhancements with a small section for repairs. I will be sailing as much as possible and documenting my adventures on this blog.

My plan is to build up to a epic solo sailing Adventure.

Sunday, May 3, 2015

Off we go

Well we are nearly ready, actually we nearly left today. It was a bit windy and rainy, so we put it off and got some more work done. I put up some nets for storing vegetables and kitchen ware. I finally got around to putting some shelves in behind my cooker for pots and pans. Things are really starting to find their places. Kate has been cutting out patterns of fabric, so we can finish the cushions off at anchor somewhere. I tuned the rigging this morning and it all looks very good. I fitted my radar reflector up as high as possible last week, yes we have been very very busy.


The Swans really like my rowlocks. Or maybe they just want some more food.
We now have 24 five litre water containers on board which have filled the bilge up completely. This should keep us going for a little longer than a week. We have filled nearly every available space with something and Valmik has gone down in the water a inch or so.




Kate and I getting some Tips from the pro!
Radar reflector going on



Me cutting the foam for Valmik's cushions.Thanks Natalie and Fiona for the foam!!




Our Rough Plan.
Leave on tomorrows tide.
Anchor or pick up a buoy in South deep for one or two nights and finish off some jobs.
Sail the short distance to Harty ferry and anchor for a night.
Go into Oare creek to meet up with a mate.
Go into Faversham creek for fresh veg and fruit.
Anchor in Stangate creek
Sail up the medway and find a mooring.

All of the above might get compressed slightly and we may skip some.

Kate and I are considering then cruising the Black water before heading off down to the South coast.


Friday, April 17, 2015

Fully loaded with equipment

I have finished work and have been living back on Valmik now for two weeks. The progress is going a little slower than expected but do not worry we are on track. If you were wondering how much stuff I can fit on a 26 foot yacht check out these two pictures, And the stores are still to come.

Can you see the monkey?

There is definitely a floor in there somewhere!
 So In two weeks I have managed to filter out/edit a lot of this stuff. At this stage I have everything nicely organised and tightly packed away and there is actually still plenty of room for food and water in the bilge. Consolidation is essential in a small boat! What I had trouble with is relinquishing my supplies of equipment that I may need. But as you can see in the above pictures there has to be a limit. As I find the confidence in my boat I might even be able to do away with even more. But I have found a nice place for my sewing machine which I really want to take with.


 Also in these last two weeks I have completed my VHF DSC short range marine radio licence. I made some sail covers which I have been trying to get around to for ages. I have fitted two solar panels and worked a little bit on improving my bilge pumps. Kate came down for a week and started making some new covers for my cushions. I had four outboard engines onboard, but only one worked. I might be getting one more, maybe

Saturday, January 17, 2015

Valmik's First Mate!

I have some good news to announce, my lovely fiancée has handed in her resignation and will be joining me for quite a lot of Valmik's Adventure this year. We have been planning this for some time and now it is official. We are both really excited and also quite scared because we know that some of the trickiest sailing in the world is around the United Kingdom!

And to prove this, here is a summary of something really scary that I read last night:

Pentland firth can be very dangerous for all craft. It should only be navigated with medium strength wind, no swell, good visibility and a neap tide. In this area the tidal stream can reach 12 knots, with 18 knots being the highest recorded. Some of the tidal races that can occur in this area are extremely dangerous for small craft. Very careful planning is required!!!

Just looking through my Almanac proves that the UK has a number of these tidal races around headlands and such like. These can really punish a boat if it's caught out in them and should be avoided, especially in wind over tide conditions. And I have been told that some of these nasty conditions create massive standing breaking waves. Basically these are waves that are stationary on the Earth's surface, they have a strong tide flowing past them and a strong wind causing them to break. The sea bed also has an effect similar to rapids in some locations.

So on a lighter note, and because of the dangers listed above, Kate and I are off to look for safety equipment at the London Boat Show tomorrow.  I will be giving Kate a lesson on how to barter/haggle and not be swindled (hopefully).


We are after amazing deals on the following:

  • Liferaft
  • Lifejackets
  • Epirb (emergency position indicating radio beacon) and Plb (personal locator beacon)
  • Flares
  • Lines/Rope
There is lots more that I would like to have on board, but unfortunately I am restricted by a tight budget. I would love to be able to afford things like forward facing sonar and an AIS receiver, but they are not on my list.  


Sunday, December 14, 2014

Re Rigged and Raring to go

Valmik now has her mast back up and tuned with a thick coat of tar all over the standing rigging. This should keep it well protected over the next nine months. I have also finished my new hatch garage with dorade vents and am very happy with how it looks now. This will improve ventilation whilst at sea and they do not need to be closed down like my other mushroom vents, unless I get caught out in a gale. Somebody has already commented that they look like shrek's ears, and indeed they do. Click HERE for full photo album.


 Valmik still needs all of the paint work to be finished properly, as so far during the whole restoration I have done only the minimum required inside and out. There is still a long list of various jobs but they are becoming smaller and smaller, and some will have to be done on the way. It is only a little over three months now to the planned departure date, and it is all getting very real. I am reading "heavy weather sailing" for the third time, then will start with my navigation books again. Also I will read books on weather, yachtmastering and electrics, as well lots of research and chart study. I have just done my financial calculations, and it is a little bit disappointing. I will be working full time up until March and need to raise a much money as possible as I still need some expensive pieces of equipment like these, Liferaft, EPIRB, Solar panel, life jackets, flares and another 12 volt battery maybe with a little petrol generator.

I am very excited and really close now to be doing what I have been striving towards for these last seven years. It is still really scary though but I can not wait to get out there with the wind in my sails.

                                                  But hopefully not these sails too soon
Third reefed main with the Storm trisail, independent of the boom, in its own specially made groove. And the storm jib.

Saturday, July 5, 2014

Better safe than soggy


Well firstly I would like to say sorry for the big gap in my posts.

I had to return home to AUS because my Grandma was unwell. I got home in time to see her before she past away. She will be dearly missed, and always remembered. I love you NANA.  I stayed on for four or so months as a very good friend was getting married.

I have been back in the UK now for five weeks and have been very busy working on other boats.

The next announcement to make is that, I will now be starting  my circumnavigation of the UK early next year. About March 2015, So that will be seven years since rescuing Valmik from the bonfire. I am not sure if time has gone quickly or slowly, but I am pretty sure it has gone:-) I have learnt so much over the years and could bore all of you by talking about it again, If I haven't already! But I wont, instead how about an exciting sailing adventure story with some mishap? Yes That is what you all want to hear. What this blog is meant for!

Well Valmik looked Great when I returned to check on her after four cold months (Nice and warm for me though). Those old mushroom vents were working very well (My special thanks to the guy who sold me one for £2 not knowing what it was, cheers) and there was not a spot of mold anywhere. The best thing is, that I was returning to a boat that was ready to go for a sail. That beautiful old seagull outboard started on the second pull and with small supplies and three crew we were off for a short sail. It was my first sail on Valmik for this year and everything worked really well. We were not planning on going far, just playing about with the boat, relaxing and enjoying the water. Everyone on board was happy to sit back and enjoy the lovely day and let me do all the sailing. I decided to test my sailing skills through close maneuvering around a line of buoys. I did quite a few figure of eights around them with a fast ebbing tide. I was a little bit sloppy getting the sheets sorted out in the quick short tacks to begin with. And my tidal offset judgment needed quick improvement as the poor old dingy, still lashed to the starboard quarter, started riding up over the buoys as I cut it far too close, twice. Wind was quite light about 12 knots and I was once again very impressed with Valmik's ability to hold her course on all points of sailing in these light conditions. Lashing the tiller but not really even needing too, she can be left for quite a while, I can not wait to test how much she strays off course on longer runs. This will all be a different story once the wind started picking up I am sure.

Anyway so we are all quite relaxed, I am steering us straight at this little island that is not too far away. I was thinking about tacking very shortly, and asked my crew to please move slightly out of the way so I could see the depth sounder, but it was too late I felt her ride up on a hard patch of mud and heel over a little instantly. With a tide fast falling there was little we could do to get her off. I had fouled on Fowley island! I rowed out two anchors but could not budge her. My last option was a line lead from an anchor in deep water up into the rigging and down to a winch. She would heel over and be pulled out at the same time. I chose not to adopt this method and my crew were not too keen on it either. So we went about setting her up for the boat to go over on her side and rest on fenders. Not like last time I went aground in soft mud and kept her safely upright. As we started heeling over the top planks started getting wet and because they had dried out a bit they started letting water in. We pumped and bailed this out as it came in. I re routed one of my big manual bilge pumps to the side of the hull as this was fast becoming the lowest point and where the water was gathering. We then had time to relax although at a slight angle. And I repositioned the two anchors to get better use of them before the tide came up.



I will now write a little bit from my diary about how I was feeling at this point.
Diary
"I started to feel upset and disappointed with myself for not being more vigilant and tacking earlier. It is hard to describe how I felt, but a little like this. A sort of adrenalin low mixed with a slight amount of dread and consciousness of one's own failure, with an uneasiness feeling about the near future."

We were safe for a while and we all managed to get some rest. And we got a nice hot meal, luckily my gimbaled stove goes over to 45 degrees. I was a little worried about the amount of water that came in, and hoped that when Valmik rested on her side that the planking would not shift too much and create more water ingress when the tide came up again. There were a few rocks about, as you can see above, but the hull looked all good. I called the coast guard to inform them of our position in case we needed assistance with some more pumps. I told them I was confident we would be all good and they decided to sent out a boat just to make sure. As a friend likes to say  :-o "better safe than soggy".

Now here is a funny little technical bit,
One of my crew asked me if I had wooden plugs for my skin fittings during the action. I have seven skinfittings in total, two sea-cocks which close and open for the self draining cockpit and one for the depth sounder. These are all not a problem for water ingress, unless they are damaged on the inside. But he was talking about water siphoning in. I also have two skin fittings for the manual pumps which do not have closing valves, but that do have diaphragms which stop the water coming in. So these are also not a problem. One of my 12 volt electric pumps has a ball valve attached to the skin fitting the other does not. A ball valve is like a manual tap which you can turn on and off. In the very early stages of the restoration I fitted a non return valve on my then, one and only, electric pump. This created problems for the electric pump to push water out past the air in the hose and I removed it and probably thought the ball valve would suffice. I then fitted a bigger electric pump much later without a ball valve. So when Valmik heeled over and these two skin fittings (one on either side) went under water they started filling the boat with water. One was on a float switch which would of pumped it out when it filled. Essentially working hard to pump out the water it let in. I do not know how this problem escaped me but am sort of glad we had all of these drama's to show up the fault. So when my crew asked me this question I told him not to worry.

 Well it is funny how we can get stuck in our ways of thinking sometimes. For some reason I didn't think it possible for water to get in through there, or more to the point, did not think! I thank you now Pete although I did not before. I ended up finding this problem by myself anyway, after stupidly disregarding and failing to see my crews point and the bigger picture. I decided to improve on my bigger pump's position about 30mins before the water drew nearer. It had a fixed location at a higher point in the bilge which I wanted to change. I also wanted to give it the freedom to roam to either side of the hull in case of future similar episodes which will try to be avoided. First thing I did was remove the hose from the pump. And what did I find in the pump to make me feel like an idiot. Click here to find out  Ha ha,It could have only come in from one way. And I am lucky we went down right one top of it as there would of been no other evidence otherwise.
Now I knew my two electric pumps both let water into my boat when heeled over. I drew an image a week later and literally kicked myself after I had illustrated it.

In the basics when heeled over and the skin fittings go underwater water siphons into the boat. I have to laugh at how stupid I feel again. HA ha. This would explain excessive pumping during the 2013 Swale barge match.  On the good side hopefully she will not leak as much in the future when heeling over so much after I sort it out.

Back to the story, and I am afraid the exciting parts are over but a funny one to come.
Well I felt like a down right Fool, Obviously, And the life boat was on the way to check on us. When the water reached us and rose up I did not expect any water to come in, and not much did at all. Well the life boat was nearing us now and they were just coming to check we were all right. We could of had structural damage after all, and they would of been 30 mins away after calling them again. So as they were getting closer and the bilge was not filling, I was filling. Filling with the sense that I have wasted their time. Filling, I suggested to my crew that we chuck a couple of buckets of water into the boat. They did not see the funny side! I was joking of course. Well that the funny part! and Yes it Was quite funny even if I say so.

After the life boat saw that we were not sinking, we had our anchors out ready and we had half a brain they left, with our thanks for being there just in case. We got lifted off the hard mud by the tide as expected and then the wind and tide managed to pin us against our own anchor line. It was really weird! The anchor line left the bow went down along the hull on the down tide and leeward side of Valmik and was quite happy to stay there. We were anchored from the bow but at the stern. With a good suggestion from Terry we just spun her around using the outboard then motored back in to our mooring in the dark. It was a little bit hairy but educational going up a thin creek at night. We escaped with only a minor cut to Kate's finger whilst cooking.
I will try to put up a funny little video on face book shortly. Yes it is Funny! follow the link

Thats all folks boats.

Friday, December 27, 2013

A brief summary of 2013

2013 Has been a very fun and eventful year for Valmik and me.

The Highlight is most definitely winning the Swale Barge match this year with my lovely girlfriend. I met her on the evening after last years race. She, her father, and a friend saved Valmik from drifting off into the dover straight when my anchor dragged.



I Had a nine day holiday cruising up the river Thames with my lovely girl friend on her Dutch Barge. We had a really lovely and relaxing time. I was amazed at how beautiful the river Thames is in the lower reaches of the non tidal part.



I crewed on a tall ship for seven days from Essex to Oban through the New Caledonian canal. I spent almost all of everyday up in the rigging tying the Ratlines. I managed to get an amazing picture of me planking on the top of the mast as we sailed through Loch Ness.




And lastly I got a job crewing on a big tug boat, towing a boat from Holland to England. The weather was perfect and I had a really nice trip. The boat we towed really wanted to stay pointing sideways the whole trip. We really should of had a big sea anchor/drogue deployed to keep her straight. Fighting chafe was the biggest problem, I learnt alot.

 

And that is the most exciting things that I did this year on the water.
 
Hope you all had a great Christmas and have a great new year. 

Sunday, November 24, 2013

BACK AFLOAT


Well I will start by saying that I am very happy with my full survey:-) and Valmik is now back in the water where she belongs. I have corrected all of the problems found.


The Keel bolt washers were a very quick and easy fix. The nuts were starting to get rusty anyway and I had planed to paint them properly, whilst out of the water getting this survey. Cutting up some steel plate and drilling out the holes, then fitting and painting took up one full day and two evenings.

The planking issue which was found took me about two weeks to sort out. I had to remove some planking and replace with three planks. This was because there was some short planking, and the butt joints where these planks met where all too close, creating a weak point in the hull. A bad repair was done in the past and it was not recognised by me. It is very skilled work to replace planks on a clinker boat, and I managed to make one silly mistake. The first plank went in very smoothly and I scarfed the joint this time. It is much harder to do a scarfed joint than a butt joint, but it is much stronger. I wanted to test myself and enhance my skills, and it is quite challenging to avoid gluing the two planks together when gluing the scarf joints. I ruined the second plank and two days work because I assumed the angle of the land, where the plank touches the one above it, would be the same as the first. I had only a small discussion with a shipwright about it all before I started the planking, so was mostly teaching myself. It is a good lesson to learn, as the angle of these lands gives the boat its lovely shape in a way. The second attempt on the second plank went very well as I had the failed attempt to use as a template. I unfortunately destroyed the third plank removing it, and couldn't use it as a template for the replacement plank like the first two. But made a separate template up for it which worked well. I need to thank my three helpers for their assistance with the fastening of these planks. Thanks Olly, Ewan and Chris for your help with the copper clenching, much appreciated!



Also during Valmik's short time ashore I managed to get some other jobs done.

Antifoul, Which is much easier out of the water than in. Thanks Kate for helping.

Painting of the bilge, Which is always wet when afloat, being a wooden boat :-)

Rudder steps, Two steps on my rudder for climbing aboard easier.

 I also have a new paraffin heater which my mate sold to me. It is really neat and runs off the same pressurized tank for my stove. Got the cabin up to 25deg C in an hour from 6deg C. I had to turn it off at this point, as some things need insulating to prevent them from over heating.





It was also just really good to see all of the work I have done is holding up under the water.